Parallel 5KW HFP inverter
NOB: NA-HFP-5KW
HFP series is a new all-in-one hybrid solar charge inverter, which integrates solar energy storage &means charging energy storage and AC sine wave output. Thanks to DSP control and advanced control algorithm, it has a high response speed, high reliability, and high industrial standard.
5KW Parallel HTP Type All-in-one Inverter Controller for solar power system home
product Features
- Full digital voltage and current double closed-loop control, advanced SPWM technology, the output of pure sine wave.
- Two output modes: mains bypass and inverter output; uninterrupted power supply.
- Available in 4 charging modes: Only Solar, Mains Priority, Solar Priority, and Mains & Solar hybrid charging.
- Advanced MPPT technology with an efficiency of 99.9%.
- With the charging requirement (voltage, current, mode) settings, and suitable for various types of energy storage batteries.
- ON/OFF rocker switch for AC output control.
- Power saving mode available to reduce no-load loss.
- Intelligent variable-speed fan to efficiently dissipate heat and extend system life.
- Lithium battery activation design, allowing access of lead-acid battery and lithium battery.
- 360 ° all-round protection with a number of protection functions. Such as overload, short circuit, and overcurrent.
- Supply of a variety of user-friendly communication modules, such as RS485(GPRS, WiFi, Bluetooth), CAN, USB, etc., and suitable for computer, mobile phones, Internet monitoring as well as remote operations.
Product Parameter
| Models | NA-HFP-5KW | |
| AC mode | Rated input voltage | 220/230Vac |
| Input voltage range | (170Vac~280Vac) ±2%/(90Vac-280Vac)±2% | |
| Frequency | 50Hz/ 60Hz (automatic detection) | |
| Efficiency | >95% | |
| Conversiontime (bypass andinverter) | 10ms (typical) | |
| AC backflow protection | yes | |
| Max. bypass overload current | 40A | |
| Inverting mode | Output voltage waveform | Pure sine wave |
| Rated output power (VA) | 5000 | |
| Rated output power (W) | 5000 | |
| Power factor | 1 | |
| Rated output voltage (Vac) | 230Vac | |
| Output voltage error | ±5% | |
| Output frequency range (Hz) | 50Hz ± 0.3Hz/60Hz ± 0.3Hz | |
| Efficiency | >90% | |
| Overload protection | (102%<load<125%) ±10%: Report error and turn off output after 5 minutes; (125%<load<150%) ±10%: Report error and turn off output after 10 seconds; Load>150% ±10%: Report error and turn off output after 5 seconds; | |
| Loaded motor capacity | 4HP | |
| Output short circuit protection | Circuit breaker | |
| Bypass circuit breaker specification | 40A | |
| Rated battery input voltage | 48V (minimum starting voltage 44V) | |
| Battery voltage range | 40.0Vdc~60Vdc ± 0.6Vdc (undervoltage alarm / shutdown voltage / overvoltage alarm / overvoltage recovery…LCD screen can be set) | |
| AC charge | Battery type | Lead acid or lithium battery |
| Maximum charge current | 60A | |
| Charge voltage range | 40 –58Vdc | |
| Short circuit protection | Circuit breaker | |
| Circuit breaker specification | 40A | |
| Solar charge | Max. PV open circuit voltage | 145Vdc |
| PV operating voltage range | 60-145Vdc | |
| MPPT voltage range | 60-145Vdc | |
| Battery voltage range | 40-60Vdc | |
| Maximum output power | 4200W | |
| PV charge current range | 0-80A | |
| Charge short circuit protection | Reverse polarity proection | |
| Operating temperature range | -15°C to 55°C | |
| Storage temperature range | -25°C ~ 60°C | |
| Heat dissipation | Forced air cooling, adjustable airspeed | |
| Communication interface | USB/RS485 (Bluetooth/WiFi/GPRS)/Dry Node Control | |
| Dimensions (L*W*D) | 426mm*322mm*124mm | |
| Weight (kg) | 10.8 |
